Buildex® Bugle Batten Metal Teks® Screw - ITW Proline

Trends

Think BuildExtreme.
Think BuildExperience.
Think Buildex®.

With a century of specialised innovation, Buildex manufactures and supplies easy-to-install, long-lasting fasteners for demanding building applications in the harsh Australian environment. 

Think BuildExtreme.
Think BuildExperience.
Think Buildex®.

With a century of specialised innovation, Buildex manufactures and supplies easy-to-install, long-lasting fasteners for demanding building applications in the harsh Australian environment. 

Bugle Teks® Screws

The Buildex Bugle Batten Metal Teks® Screw offers a tailored range of premium products with a choice of superior finishes for specific jobs and backed by expert technical support, so you can deliver a top-quality end-result with a 14G thickness for added strength.

Boasting outstanding trade quality, the Buildex® Bugle Batten Metal Teks® Screw is a heavy-duty fastening solution for fixing timber to metal substrates, such as pergolas, fencing and boardwalks to steel framing.

Available in four length options:

  • 50mm
  • 75mm
  • 100mm
  • 125mm

Bugle Teks® Screws

The Buildex Bugle Batten Metal Teks® Screw offers a tailored range of premium products with a choice of superior finishes for specific jobs and backed by expert technical support, so you can deliver a top-quality end-result with a 14G thickness for added strength.

Boasting outstanding trade quality, the Buildex® Bugle Batten Metal Teks® Screw is a heavy-duty fastening solution for fixing timber to metal substrates, such as pergolas, fencing and boardwalks to steel framing.

Available in four length options:

  • 50mm
  • 75mm
  • 100mm
  • 125mm

Features

  • Zinc Alloy 3 – Galvanised finish for external use.
  • Internal Hex drive for high-torque fastening.
  • Self-drilling into steel up to 3mm thick.
  • Countersunk bugle-head for a flush surface finish into timber.

Features

  • Zinc Alloy 3 – Galvanised finish for external use.
  • Internal Hex drive for high-torque fastening.
  • Self-drilling into steel up to 3mm thick.
  • Countersunk bugle-head for a flush surface finish into timber.

Installation

To install the Buildex® Bugle Batten Metal Teks® Screw:

Step 1 – Prior to fastening, pre-drill a 7mm clearance hole into the timber.

Step 2 – Fit screw to a power driver and set to High.

Step 3 – Place screw at fastening position.

Step 4 – Apply consistently firm pressure (end load) to the screwdriver until the screw has fastened.

Installation

To install the Buildex® Bugle Batten Metal Teks® Screw:

Step 1 – Prior to fastening, pre-drill a 7mm clearance hole into the timber.

Step 2 – Fit screw to a power driver and set to High.

Step 3 – Place screw at fastening position.

Step 4 – Apply consistently firm pressure (end load) to the screwdriver until the screw has fastened.

Series 500 Range®

Also available is the Buildex® SuperTEKS Series 500® Hex Head Metal Screw, which is designed for use in thick, hot-rolled steel from 3mm to 12mm. Its features include:

  • Extra-long cutting flute to drill, tap and fasten in one simple operation.
  • Cuts its own mating thread and fastens securely.
  • TEKS Point for drilling into thick steel while ensuring maximum pull-out strength and a high strip torque.
  • Climaseal® 3 – Galvanised.
  • Fast installation to save time and money.

 

The 38mm variant of the Buildex® SuperTEKS Series 500® is ideal for applications such as signs, fire protection equipment, as well as pipe and cable saddles.

 

The 68mm variant of the Buildex® SuperTEKS Series 500® is a roofing and cladding screw which can be drilled on steep, sloping roofs or near the edge of sheeting. Thanks to the sealing washer, it’s suitable for when a water tight finish is required in roof or wall cladding, signs, and plumbing fittings.

 

When the job is critical, choose premium products by Buildex® – it’s made for trade!

Series 500 Range

Also available is the Buildex® SuperTEKS Series 500® Hex Head Metal Screw, which is designed for use in thick, hot-rolled steel from 3mm to 12mm. Its features include:

  • Extra-long cutting flute to drill, tap and fasten in one simple operation.
  • Cuts its own mating thread and fastens securely.
  • TEKS Point for drilling into thick steel while ensuring maximum pull-out strength and a high strip torque.
  • Climaseal® 3 – Galvanised.
  • Fast installation to save time and money.

 

The 38mm variant of the Buildex® SuperTEKS Series 500® is ideal for applications such as signs, fire protection equipment, as well as pipe and cable saddles.

 

The 68mm variant of the Buildex® SuperTEKS Series 500® is a roofing and cladding screw which can be drilled on steep, sloping roofs or near the edge of sheeting. Thanks to the sealing washer, it’s suitable for when a water tight finish is required in roof or wall cladding, signs, and plumbing fittings.

 

When the job is critical, choose premium products by Buildex® – it’s made for trade!

RELEVANT PRODUCTS TO THIS ARTICLE