Treated Timber Screws

Treated Timber Screws

Zenith self-drilling Treated Pine screws are specially designed for quick and easy installation with maximum holding power.

Available in Tufcote coating to resist the corrosive effects of treated timbers.

Selection Guide

Countersunk Rib Head

For general fixing to Treated Timber, e.g., trellis, outdoor furniture, fencing, lattic, etc.

Rib Head Needle    

How to use

How to use Zenith Treated Timber Screws:
  1. Measure the total thickness of the materials to be fastened.

  2. Choose a screw long enough to provide approximately 20mm of thread embedment into the timber being fastened to.

  3. Fit a #2 Phillips drive bit to a power screwdriver set to a low speed, approximately 1000rpm.

  4. Put screw onto a screw drive bit and place at fastening position.

  5. Push sharply on screwdriver to create a starting point.

  6. Drive screw home until head is flush with the surface.
     ITW PROLINE Copyright 2015 Sales & Service Support: 1300 721 738  
     Home Corporate info  | Privacy | Disclaimer | Contact us