Versatile FomoFill™ is a polyurethane polymer that reacts with moisture in the air causing it to expand to fill any shaped hole or cavity. The cured foam can then be cut or shaped and painted as desired. FomoFill™ is great for thermal insulation, to block out drafts or to fill or repair big holes prior to painting.

Selection Guide

  • Expands to fill BIG holes
  • Once cured, can be cut and shaped as required
  • Non-shrink
  • Can be sanded, filled and painted to produce a neat finish
  • Excellent insulator
  • Predominantly Closed cell structure
  • Ozone friendly – CFC, FC and HFC free

How to use

  1. Protect surfaces around work are from unwanted drips
  2. To aid foam expansion, dampen surfaces using water spray bottle or similar
  3. Screw nozzle onto valve on top of can. Take care not to over tighten or activate the valve.
  4. Shake can vigorously for approximately 60 seconds, turn can upside down, then point nozzle into the cavity to be filled and depress trigger to dispense the foam
  5. Fill cavity to about 1/3 full. Foam will expand and fill cavity 
  6. Clean up FoamFill with Foam Cleansing Solvent before it sets
  7. Refer to Technical Data Sheet and MSDS available from www.ramset.com.au, for precautions and further detailed installation instructions
  ITW PROLINE Copyright 2015   customerservice@itwproline.com.au   Sales & Service Support: 1300 721 738   
    Home Corporate info  | Privacy | Disclaimer | Contact us