Loxin™ Shield Anchors

The Loxin™ Shield Anchor is a medium duty, torque controlled, internally threaded, expansion anchor, designed for use in solid substrates such as concrete, brick, block and stone. The Loxin™ requires the installation of a machine bolt or threaded rod to set.

Selection Guide

  • The Loxin™ fits flush with the surface of the substrate, leaving no protrusions when not in use.
  • The anchor’s internal thread facilitates the use of machine bolts and threaded studs of any length removing restrictions on fixture thickness.
  • The Loxin™ requires only shallow embedment, which reduces the risk of striking rebar during hole drilling.
  • Four-way expansion provides better grip in weaker substrates.


How to use

1.Drill or core a hole to the recommended diameter and depth. Clean the hole thoroughly with a hole cleaning brush. Remove the debris with a hand pump, compressed air, or vacuum.  
2.Insert the Loxin™ into the hole, nut end first, and tap with a hammer until it sits flush with the surface of the substrate.  
3.Position the fixture over the Loxin™, insert the correct diameter bolt or stud through the fixture and tighten. 
  ITW PROLINE Copyright 2015   customerservice@itwproline.com.au   Sales & Service Support: 1300 721 738   
    Home Corporate info  | Privacy | Disclaimer | Contact us