|
|
| Buildex® self-drilling Treated Timber screws are specially designed for quick and easy installation with maximum holding power. Available in either a Zincalloy 3® or special Climacoat 3® coating which meets AS3566 Class 3, to resist the corrosive effects of treated timbers. | |
|
|
Selection Guide | | Countersunk Rib Head (Needle Point) For general fixing to Treated Timber, e.g., trellis, outdoor furniture, fencing, lattice, etc. |  | Bugle Batten (Type 17) For heavy duty fixing to Treated Timber, e.g., fencing, pergolas, boardwalks, gates, sheds, etc. |  | | Self-Embedding Head (AW Point) For fixing compressed cement sheet flooring to timber |  | Self-Embedding Head (Type 17) For fixing particleboard flooring to treated timber joists |  | | Countersunk Rib Head (Wing Tek) For fixing treated timber to steel up to 4.5mm thick, e.g., floors, fencing, etc. |  | | |
|
|
How to use | Buildex® Treated Timber Screws - Measure the total thickness of the materials to be fastened.
- Choose a screw long enough to provide approximately 20mm of thread embedment into the timber being fastened to.
- a) For Countersunk Rib Head and Self-Embedding Head screws fit a #2 Phillips drive bit to a power screwdriver set to a low speed, approximately 1000rpm.
b) For Bugle Batten screws fit a 5mm Hexagon drive bit to a power screwdriver set to a low speed, approximately 1000rpm - Put screw onto a screw drive bit and place at fastening position.
- Push sharply on screwdriver to create a starting point.
- Drive screw home until head is flush with the surface.
|
|
|