Ramset
Ramset

RamPlug™ Nylon Frame Anchors

The RamPlug™ Nylon Frame Anchor is a light duty, rotation setting, interference fit anchor, designed for use in a variety of substrates such as concrete, stone, solid brick, hollow brick, solid block, hollow block, hollow slab block and lightweight concrete (AAC) block. Available in Standard, Long and Ultra Long, with (Ultra Long only) or without a countersunk or hex head screw, there is a RamPlug™ for a range of light duty anchoring applications.

Selection Guide

Ramplug Long Ramplug
UltraLong Ramplug

Anti rotation fins are compressed within the hole and prevent the Ramplug from rotating during expansion.

Best used in solid masonry and pressed clay bricks.

The fixing screw can be removed and re-installed into the expanded Ramplug at will

    

How to use

1. Drill a hole to the recommended diameter and depth using the fixture as a template. If the fixture thickness is less than the maximum, increase the hole depth accordingly. Clean the hole thoroughly with a hole cleaning brush. Remove the debris with a hand pump, compressed air, or vacuum.  
2. Insert the anchor through the fixture and tap with a hammer until the collar of the anchor contacts the fixture.  
3. Tighten screw until the head of the screw is flush with the collar of the anchor. 

Ramplug-Standard-Install


  ITW PROLINE Copyright 2015   customerservice@itwproline.com.au   Sales & Service Support: 1300 721 738   
    Home Corporate info  | Privacy | Disclaimer | Contact us